Search the forum,

viessmann vitodens 100

Discuss viessmann vitodens 100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

paulster

Messages
12
Came across a viessmann vitodens 100 hose coming from pump burst quite a large slit on hose (still in warranty) was just wondering has anyone came across this thanks
 
I have never heard of one going so quick , hoses in boilers are a pain to us all . The systems they are fitted to , should be as clean as possible with no chemical cleaners left in the water and no inhibitor. The hardness of the water also seems to lower the life of them .
 
refuse to fit anything with car radiator hoses in them, always cause hassle later on.
 
No probs got them coming out this week boiler has only been fitted 10 month only fitted a few was just wondering if it was a common thing
thanks for replies though
 
Status
Not open for further replies.

Reply to viessmann vitodens 100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
223
exedon2
exedon2
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
Dave Moore
D
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
218
cheddarman
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
124
Stigster
Stigster
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
66
Dan
Dan
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock