Search the forum,

Discuss Valor Flamenco Unigas gas fire, parts no longer available? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gbheatingtech

Hi guys, looking for the leads going from the spark generator to the micro switch for the above fire, had a look around, and have been told apart from the thermocouple and ht lead, there is nothing available. Just wondered if you guys had any tips or somewhere you go for hard to find spares etc.

Already tried Gas Appliance spares (Preston), Heating world of spares, euro boiler parts.

Any help would be gratefully appreciated.

George
 
This cust is as tight as they come, might be able to re-wrap the existing wires so they don't drain the battery. I was thinking that as I have to take out existing wires to re-wrap may as well see if I can get new ones. Found the micro switch though :D
 
Status
Not open for further replies.

Reply to Valor Flamenco Unigas gas fire, parts no longer available? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock