Search the forum,

Discuss Uploading images in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
for example,
 

Attachments

  • IMAG14602_zps93bbf113.jpg
    IMAG14602_zps93bbf113.jpg
    45.4 KB · Views: 35
Do you think we get paid for this? None of us receive a bean.
I'm well aware of that and appreciate the time you spend. My beef is really aimed at the "owner" of this website.

Check the settings on your browser's
Thanks for the suggestion. I have tried using both IE8 and Firefox on two different computers and get the same result. "Posting Permissions" says: You may not post attachments. I have also tried using the browsers in Safe Mode.

The last pic I posted was on 18/11/2013 I had posted 42 pics up to then.

Could you point me to the setting which might be causing the problem.

Incidentally I don't have this problem on the DIYNot, UltimateHandyman and Screwfix Forums.
 
Status
Not open for further replies.

Reply to Uploading images in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
253
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
204
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
212
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
200
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock