Search the forum,

Discuss Update on Grundfos UPS2? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
22
Are there still some startup problems with these circulators? Most of the comments are now a few years old, though the sensitivity to spikey voltage was mentioned only a couple of months ago. I would also like to ask if these problems occurred when on a proportional pressure speed setting or also on fixed speed settings. For the old system I am working on with no TRVs I would used a fixed.
 
Not had any for a bit now !
Must have been addressed, it was a component on little PCB in grundfos as far as I remember but only in UPS 2, not the alpha
 
Status
Not open for further replies.

Reply to Update on Grundfos UPS2? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock