Search the forum,

Discuss Tool show THIS WEEKEND - South of England. [Feb Mar 2015] PORSADRILL in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
3

365drills

11021181_10152611445447014_5158240377491271355_n.jpg



toolshow-logo.jpg
This weekend in South of England
[h=2]How to get here[/h] [h=3]Finding the show[/h] [h=3]by Car[/h] The FFX tool show is being held at The Kent Event Centre which is ideally suited for arrival by car. It is located on the A249, which is a dual carriageway. From the M20 Motorway, exit the motorway at junction (7) and follow signs to Sittingbourne and Sheerness A249. The Kent Showground is clearly marked and is approximately 2 miles from the Junction.

From the M2 Motorway, exit the motorway at junction (5) signposted Maidstone A249. The Kent Showground is approximately 5 miles.

The Kent Event Centre postcode is ME14 3JF but if using a GPS you may wish to use the postcode for the Shell Garage – ME14 3HT but turn off when you see the feeder lane.


http://www.*********.com/jpgs/stand3.jpg

http://www.*********.com/installer_live/6.jpg


CLICK THIS LINK
 
See you there RAW85

http://www.*********.com/installer_live/10.jpg

But I am not sharing..
 
Status
Not open for further replies.

Reply to Tool show THIS WEEKEND - South of England. [Feb Mar 2015] PORSADRILL in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
76
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
377
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
161
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock