Search the forum,

Discuss To all Grant installers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
If I ever use 10mm compression fittings (which is once in a blue moon) I always use inserts.

I have a litre pot of Heldite and I use it to top up a small pot which I keep in the toolkit.
 
I have asked before and not had any. Just done a search on the trade store as well. No heldite there. Going to order quarter of a litre from the link Croppie posted.
 
If you get stuck without Heldite, Halfrauds sell little tubes of Hermetite Red which works too and is approved for oil.
Expensive for what it is but can get you out a hole when the pot of sealant has disapeared off the van somewhere,
 
Status
Not open for further replies.

Reply to To all Grant installers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
227
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock