Discuss The reason I don't use flexis... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
-
Not open for further replies.
Administrator
Staff member
Admin
Don't mind me while I reply to a few of the threads. We need the new thread pages to be picked up correctly. If this thread isn't current, just visit the plumbing forum and post your own new thread or checkout the other existing threads.
- Status
-
Not open for further replies.
Reply to The reason I don't use flexis... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hi my toilet is leaking both from the water inlet and from the existing copper piping. I'm usually quite handy and many many years ago, I replaced...
Hi all. I'm looking at replacing the my ageing copper sealed CH system pipework using, dare I say it, Buteline. I'm a reasonably competent DIY'er...
Hi All,
Today was sat at home and heard a pop from the kitchen, went in there and had water gushing everywhere from a burst on the flexible hose...
After drywall removed:
And after removing skirting, insulation, and dabs (Architrave cutter, chisels):
Just wanted to post of few points on my...
Hi
DIYer here.
I had to repalce a mixer shower in an emergency.
There were rigid pipes in place before which I would have liked to re-use but...