Search the forum,

Discuss Testo 510 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sav

Is the above tool any good?

Got an anton apm 150 at the mo thinking of changing it to the testo is it a good upgrade or not?

Cheers
 
I have them both and use the 510 for burner pressure checks. When I need it for anything above 100mb my 150 is in my bashing bag.
The 510 is a nice little manometer that keeps my service bag light.
 
Lots of different opinions but me personally think Testo is far superior with most of there equipment
 
I use both as well, I got the 150 because I test service pipework between 1st and 2nd stage regulators. My 510 is used for burner pressures.

then there's my 120mbr J gauge and my 60mbr water gauge too. Most eventualities covered!
 
It's very sensitive though as it goes down to 2 decimel points. I swapped for the anton back a while as it's waterproof and I have a habit of leaving it hanging off the meter for a while.
 
testo is good gear but expensive imho, but its your choice, I use a kane 455 and find it does the lot and annual services are the cheapest around.
 
Used the testo.

Hate it.

Got an Evo sprint 2.

Hate it.

Give me a 455 any day of the week.
 
Used the testo.

Hate it.

Got an Evo sprint 2.

Hate it.

Give me a 455 any day of the week.

Cropster have u tried the newer ones , the coloured screens , the older ones nothing special granted but with the newer ones they have really stepped up there game
 
I use a tpi, not used any others and it does what it says on the tin. Im happy.
 
Tpi gear is good if your a tool terrorist. Breake and they replace FOC for life
 
Tool terrorism in action. Sorry baby!
a8epeqeq.jpg
duru3eje.jpg
 
New power pack or will they be raiding your house next for allegations of historic tool abuse. :D
 
Last edited by a moderator:
I have a broken screen and the service does not want to fix it. ;-( Does anyone have a malfunctioning Testo 510 or somehow spare parts?
 
Status
Not open for further replies.

Reply to Testo 510 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
274
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
205
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
167
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock