Search the forum,

Swimming pool boilers

Discuss Swimming pool boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Scott_D

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
Anyone got the ticket for this?
Is it difficult?

I have been asked to change one but dont have the ticket, was thinking about getting it when i renew in December
 
Easy tbh not as hard as acs
 
I have 2 customers with pools and they heat them with just regular boilers , I assumed thats how you heated them , lol
 
Most domestic pools have regular boilers. So your fine if they are.
 
I have a few customers with pool boilers. Keston's and large Floor standing boilers are what they have. With heat exchangers. I didn't know there was another option.
 
I'm sure it's any boiler that is connected to a pool you can't work on unless you have the qual ( money for old rope )
 
Status
Not open for further replies.

Reply to Swimming pool boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
180
ShaunCorbs
ShaunCorbs
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
173
Chuck
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
253
Chuck
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Stigster
Stigster
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
211
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock