Search the forum,

Discuss Supermod Shaun !!!!!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
Blimey I seek off for a few days , come back ( nearly ) and Shauns a supermod , well deserved pal
 
ta mate and went past my 13k mark
 
Just noticed that earlier when I realised Shaun was able to edit posts.
Shaun has almost single handed run this forum for a long time with his answers, so no surprise as he earned this.
 
Last edited:
Just noticed that earlier when I realised Shaun was able to edit posts.
Shaun has almost single handed run this forum for a long time with his answers, so no surprise as he earned this.

hope they have been upto your standard (my answers)
 
Way beyond mine Shaun! And you seem to almost never be off here. :)
I have drifted away tbh and busy lately.
Respect to your dedication!

Ta best hope you've been enjoying yourself and hard working :)
 
That is a contradiction using "enjoying" and "hard working" in the one sentence about me nowadays. :)

Just because you've slowed down a bit doesn't mean your not hard working and you still get up in the mornings so you must still like it ;)

Life's way too short
 
Just because you've slowed down a bit doesn't mean your not hard working and you still get up in the mornings so you must still like it ;)

Life's way too short

So right Shaun, life is short. That is why I am trying to avoid stress or large jobs now. Or useless customers. Only jobs I really like now are those that only take a day or less and where customers appreciate it.
 
So right Shaun, life is short. That is why I am trying to avoid stress or large jobs now. Or useless customers. Only jobs I really like now are those that only take a day or less and where customers appreciate it.

It makes all the difference if the customer is a keeper, just makes the job flow better
 
It makes all the difference if the customer is a keeper, just makes the job flow better

That is something that has to be told to people joining the trade.
I learnt it too late that some customers are not worth working for. The way I view it is lots of customers try to pick plumbers and we should do same with choosing good customers. It will eliminate all the troublesome folk. Usually a good customer I have found will also recommend me, - and to other similar good people.
 
That is something that has to be told to people joining the trade.
I learnt it too late that some customers are not worth working for. The way I view it is lots of customers try to pick plumbers and we should do same with choosing good customers. It will eliminate all the troublesome folk. Usually a good customer I have found will also recommend me, - and to other similar good people.

Yep normally the ones you can't please arnt worth working for, much rather work for the ones that appreciate you and think / care for you
 
What a love between you two guys :) enjoying reading such a love story in the morning:)

Sometimes I'm wondering if shauni is actually working :) the answer come mostly straight away after the post of a new member :) but well done definitely
 
Status
Not open for further replies.

Reply to Supermod Shaun !!!!!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
209
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
208
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
203
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock