Search the forum,

Sprinter Van

Post new thread

Discuss Sprinter Van in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
cr0ft

cr0ft

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,311
Hi all. Looking at getting one of these on an 09 plate as my next van. Does anyone have any experience with the newer ones? I know the old ones suffered from rust but the ones from 07 on are all galvanised underneath so shouldn't have the same problem. Test drove one yesterday and felt great to drive.

Would like to hear from anyone who has one for their comments.

On a separate note, has anyone wrapped their van? If so, have you noticed any increase in business from it?
 
Status
Not open for further replies.

Reply to Sprinter Van in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
171
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
266
oz-plumber
O
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
230
SimonG
SimonG
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
244
mutley racers
M
N
Oversize kitchen sink top/drainer buying one.
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
182
turnpin
turnpin
Creating content since 2001. Untold Media.

Newest Plumbing Threads

TilersForums.co.uk | UK Tiling Forum - Est 2006
Tiling Tools for Beginners
DIY Forum
Tiling Forum UK
DIY Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock