Search the forum,

Discuss Speedfit Underfloor Heating - Enginner/Plumber Required - Lincoln in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Paddski

I have the following installed downstairs and am looking for an experienced plumber/engineer in Lincoln. The system works but since last winter a couple of rooms do not appear to be warming up correctly

Paddy
Lincoln
07545137271
 
Status
Not open for further replies.

Reply to Speedfit Underfloor Heating - Enginner/Plumber Required - Lincoln in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all! So yes, Richter level 7 earthquake at least. I need to plan an underfloor heating for a 4x4 expedition/overlanding off-road vehicle, and it has to be able to withstand hundreds of miles of Australian corrugated roads and many thousands more of very bumpy roads of all sorts. A shaky floor...
Replies
10
Views
1K
P
Hi, I'm after some advice on converting my current CH system to Wiser smart system. In particular, looking for advice on whether I can use the Wiser Hub without using Wiser's specialist Underfloor heating controller. Current set-up • System boiler (Vaillant ecoFIT pure 630) with unvented hot...
Replies
1
Views
1K
E
I reckon if I did a survey of 100 heating engineers, asking what would they recommend for heating a granny annexe being built onto the side of my house, in place of the garage, most would give me a suggestion to put in a) an extension to the existing boiler rad circuit & electric water heaters...
Replies
0
Views
226
eco-heating options
E
Got an underfloor heating to install and Ive done a few repairs on manifolds etc but this is the first design and install for me. Advice and tip requested. The job is a kitchen extension with under floor heating this .will be added to the existing rad heated house. The new heated areas will be...
Replies
13
Views
2K
Hi, I have 5 bed house with underfloor heating on all 3 floors.I also have converted attic. UFH was installed in year 2000. I want to put low temp rads in attic (it currently has no heating!) and feed water from UFH on floor below. Question 1: Is this a sensible approach? Question 2: Is this...
Replies
4
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock