Search the forum,

Discuss solar training. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

Eddie Charlton

thinking of getting into solar in hampshire. however never had anyone approach regarding solar install. is there much demand for solar subcontracting out ther, to offthe risk of no work? what is the take up experienced by sole traders in the south. regards.
 
It's a nice idea to do solar but I've found people would rather spend their money on a quality normal boiler nowadays. When things finish picking up people may look at it again but not a high cust priority?
 
A few customers like to talk about this but when you start mentioning what's involved they fear a major raid on their bank account.

In fairness with a payback of around 10 years the young tend not to be able to afford it, the middle aged might well be moving within 10 years and the older ones don't want the hassle.
 
that seems on par with what i have found. i have reduced my gas bill by about two thirds by replacing my boiler and going to town on insulating my house. this is the advice i give everyone these days. I would love to think i can progress into solar, but to be honest, and as mentioned elsewhere in the forum, it seems to be the big corporate companies who seem to be milking it, with little room for independants. i attended the installer road show which was as expected, very positive about the industry, but, i have found the reality of the truth a little hard to swallow. i had thought about doing solar thermal as an add on to what we currently do with domestic gas, but fear it will be hundreds of pounds down the drain. I dont even want to go on to the MCS system, which seems biased yet again to larger companies who have the financial muscle to make this process work.
 
do our european neighbours have to go through all this to install renewable technologies ? they have been fitting them for years
 
they probably just go down their local suppliers get the bits they need and go and fit it where they want. you always hear stories about eu policies that no other country but ours seem to adhere to or it seems to me lol.
 
that seems on par with what i have found. i have reduced my gas bill by about two thirds by replacing my boiler and going to town on insulating my house. this is the advice i give everyone these days. I would love to think i can progress into solar, but to be honest, and as mentioned elsewhere in the forum, it seems to be the big corporate companies who seem to be milking it, with little room for independants. i attended the installer road show which was as expected, very positive about the industry, but, i have found the reality of the truth a little hard to swallow. i had thought about doing solar thermal as an add on to what we currently do with domestic gas, but fear it will be hundreds of pounds down the drain. I dont even want to go on to the MCS system, which seems biased yet again to larger companies who have the financial muscle to make this process work.

Have a look at this thread started by Unguided1 http://www.ukplumbersforums.co.uk/renewable-energy/22105-changing-mcs.html
 
that seems on par with what i have found. i have reduced my gas bill by about two thirds by replacing my boiler and going to town on insulating my house. this is the advice i give everyone these days. I would love to think i can progress into solar, but to be honest, and as mentioned elsewhere in the forum, it seems to be the big corporate companies who seem to be milking it, with little room for independants. i attended the installer road show which was as expected, very positive about the industry, but, i have found the reality of the truth a little hard to swallow. i had thought about doing solar thermal as an add on to what we currently do with domestic gas, but fear it will be hundreds of pounds down the drain. I dont even want to go on to the MCS system, which seems biased yet again to larger companies who have the financial muscle to make this process work.

Hi Eddie

I see you are in Fareham, which is where I am based as it happens. You may even be one of my customers.....

As you will see from the other thread, I am campaigning to have MCS accreditation simplified for independent installers, but we have what we have at the moment.

I do have some ideas about the way forward as things stand and I'll happily sit down with you over a coffee & give you my thoughts if you think that will help. DM me your number and I'll contact you next week if that sounds like a good idea.

Mick
 
go to germany and everybody is having it fitted,its goverment grants.
nobody wants it here cos the relative payback is so long ,and when you tell the custard he will save 50pound a year its a no.
working on a new build at the mo, grand design thing, i asked the owner about renewables he said wasnt worth it just a good worcester boiler.
 
I think its September this year all new builds will have to incorporate some form of renewable technology
 
Status
Not open for further replies.

Reply to solar training. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
192
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
304
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
233
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
384
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock