Currently reading:
Slight damage to 15mm Hep2 barrier pipe querry

Discuss Slight damage to 15mm Hep2 barrier pipe querry in the UK Plumbers Forums area at PlumbersForums.net

Messages
56
Hi All fitting 15mm Hep2 barrier pipe for central heating, Ive spotted a small rub on a pipe. Like it been caught with a tool of some kind. I can feel it with my finger, about quarter of a mm deep. Will I get away with it, or should I strip out. I want to keep an un-broken feed. It will end up behind plaster board.

Damn, give me slap. I was boiling when I found it. All my rub points have conduit.
 
I would replace you will curse in 5 years when full painted if it bursts
 

Reply to Slight damage to 15mm Hep2 barrier pipe querry in the UK Plumbers Forums area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock