Search the forum,

Discuss Renault Master SL33 DCI for sale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
55
Reluctantly selling my van because of the London Emission Zone that came into force last month so need to upgrade.

Its was first registered October 2001 by British Gas and is fitted inside with racking, safe box and 14 Practibox's. On the roof it has the sliding rack that allows for easy load/unload of ladders and two pipe carriers.

I bought the van in 2008 and it has always been 100% reliable. It has 59800 miles that is supported by history and MOTs. It has the 2200cc diesel engine that is very economical. All five tyres have hardly any wear. MOT until October 4 and taxed until end of Feb.

It is signwritten that can stay on or be removed (useful if you want to start in the trade as long as your not local to me). Only the tel number would have to be taken off.

I fitted a two bench seat a couple of years ago that is still as new. The front seat is worn on the edge.
Inside and outside the van is in excellent order for its age.

Offers in region of £2750. Pictures can be made available to anyone who is interested.
I am based in Woking, Surrey and viewing is possible.

Contact me on my mobile 07966014614.

Thanks for your interest in reading this post.
 
Last edited:
OK so it was overpriced!
Have found another vehicle so it has to go.
First to offer £1750 can have it.
 
I think some pictures would help potential buyers!
 
Status
Not open for further replies.

Reply to Renault Master SL33 DCI for sale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
139
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
236
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
192
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock