Search the forum,

Discuss Public liability for commercial gas work in the Plumbing Jobs | The Job-board area at PlumbersForums.net

mfgs

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,470
Who do you use for public liability insurance to cover you for commercial gas work?

I always struggle to find people to cover that. The ones that do always want a fortune for the privilege
 
trade direct
 
Who do you use for public liability insurance to cover you for commercial gas work?

I always struggle to find people to cover that. The ones that do always want a fortune for the privilege

QBE.
They cover me for Industrial as well as Commercial and Domestic.
If you do industrial then be careful as they don't all cover it.

What you call Commercial and what they call Commercial are not always the same thing so it's always better to be specific and ask.
 

Reply to Public liability for commercial gas work in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. Itā€™s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
124
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
204
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
167
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock