Search the forum,

Discuss Potterton suprima not working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

armyash

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,653
Hi,

Went to service a suprima, it's not working.

If put on a demand for Ch or hw, you hear a 'click' at the boiler, no sparking, fan does not run, the pump will spin for a second and stops. Voltage drops in and out.

Had a new PCb 6 years ago.

Customer said this has been happening since he drained the system and fitted 2 new rads. I put a magnet on the separator and it sticks good and proper. I said to cust, likely blockage on cold feed. He has since repiped and said boiler doing the same as before.

I'm thinking aps or PCb.

Any other ideas? Thanks
 
Last edited:
Status
Not open for further replies.

Reply to Potterton suprima not working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock