Search the forum,

Discuss Plumbers protective mat anyone tried one? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
142
Hi guys

i was bored so was on ebay looking around and stumbled across these just wondered if anyone had one if they was worth buying? Its £25

kind regards

imagepng


imagepng
 
I've got one of those, put it on kitchen work top under boiler during service......stops tools scratching surface and looks good to customer!
 
I have the same, wouldnt be without it. It absorbs light spills without going through. I use mine daily.
 
Yeah they are good use them all the time, also use it on top of a normal dust sheet if changing rad valves etc.
 
a must for oil boiler work, but keep a couple of clean ones for protecting worktops. but I always use plastic side up and the rubber prevents spills onto carpets etc and the cloth side dont get covered in gunk.
 
Same with fires. The cotton twill ones are a waste of time as soot goes straight through
 
Ive got sommit similar.

Bright orange canvas mat....
Tough as old boots and a great way to stand out on family pic nics
 
Status
Not open for further replies.

Reply to Plumbers protective mat anyone tried one? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
112
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
212
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
204
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
356
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock