Search the forum,

pipe master

Discuss pipe master in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

carpstu

dose anyone know if the pipe master heating up tool is anygood

anyone got any advice????????
 
Last edited by a moderator:
Re: pipe master anyone ever used one ????????????

anyone ever used one ????????????????
 
I used a REMS contact 2000 on a job once, not allowed a flame. See here [DLMURL]http://www.rems.de/maint_files/eng/files/REMS%20Soldering-Brazing%202006%20GBR.pdf[/DLMURL]

More industrial than the one your looking at, I worked really well.

Eco
 
Last edited by a moderator:
prob good for vertical joints if your bothered about snots but thats all really
 
I bought a pipemaster at a plumbing show a year or two ago down at chelsea football ground, perfect on 15 mil and 22mil but struggles on 28. I extended the power cord on mine as it only come with about 3 foot. No need to protect all the surounding woodwork etc. very pleased. John
 
Status
Not open for further replies.

Reply to pipe master in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
210
oz-plumber
O
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
166
dreikher
dreikher
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
188
John.g
J
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
273
oz-plumber
O
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
200
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock