Search the forum,

Discuss Part p in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Make them for the idiots who can't work a bending machine or even a spring if you're stuck
 
Make them for the idiots who can't work a bending machine or even a spring if you're stuck

Yea but what gets me by the time you cleaned and solded you could of learnt how to bend one its not hard
 
Obviosly it is to the brain dead Shaun lol

:D I'm even sure for the thickos they could make a wooden template :D but year your right or its even they don't care what it looks like snot all over, solder on half the fitting due to being wiped too soon etc
 
Make me think of this

image.jpg

Not bg but another big comp they had to change there name after my internal email went round :D must of spent 20 on fittings
 
but they didn't need a hot works or disable the smoke alarm system which might have meant out of hours working to do that retro-fit did they, is it in someone house ? It's not pretty but you often need to know the whole story.
 
The whole problem isn't the players its the game. Blame the cants in whitehall for making up the rules on the advice of people with ulterior motives based on profits.
We are on the wrong end of the game and always will be

I believe in this case Tamz it was not profit led (for a change) but as a result of an MP's daughters death through electrocution, very sad but we ended up with this very poor add on to the BR.
As this was a Statute it did not go through the parliamentary scrutiny process.
 
Part P - for plumbers, heating engineers or for any one else who comes in contact with electrical systems as per of their normal work activities.

It is I believe in the proses of being chanced again so I would not advice anyone not to jump in until it is clear.
What gets me is that some of the CPS providers took it upon themselves to say that you can't join unless you have a full electrical NVQ, even if you are only completing work under to old limited or defined scope, the revised Part P AD did not say that.
I can understand them trying to stop the ones who had completed a 5dayer wiring whole houses but to claim that I need an NVQ to do what I needed to do as part of my job is equally wrong.

They have to accept that electricity is such a part of other trades work that it just can't be reclaimed for the exclusivity of those strange beast who call themselves Electricians.
 
i did part p defined scope and full scope, but thinking about it realistically, it was too much additional to the job. You, like Gas safe have to register with a governing body, buy the tester (aprox £600) then as soon as you touch the system you become responsible for the whole system, so by the time you have checked everything is safe you may have added another 2 hours to your day.
just worth thinking about before you waste £1000 on the course.
 
Status
Not open for further replies.

Reply to Part p in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi there, I'm sniffing around what to expect of getting a job in plumbing. My job makes me redundant at the end of September. The whole warehouse moves to the Midlands from Bridgewater. Meanwhile I'm doing my NVQ level 2 in plumbing. The goal of the course is Renewable Energy Engineer. I'll...
Replies
0
Views
696
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are about to upgrade the upstairs bathroom and are considering installing a shower bath. My concern is that although there is more than sufficient...
Replies
15
Views
651
Hi guys. I've been running an UFH installation/ repair business for 7 years now and one of my main frustrations is finding the parts for the UFH. I've got quite good at it over the years being able to recognise the manifold brand and generation by just looking at it but then I have to go through...
Replies
1
Views
175
Hi, Hoping some of you folks can steer me in the right direction. I have been self employed for the last 15years supplying services to the industrial gas market. That ranges from installing cryogenic storage tanks, pumps and pipework to high pressure Hydrogen systems and bulk LNG. My work has...
Replies
0
Views
397
    • Like
Flue Snugs Hello all new member here. Flue snugs. I’m seeing a lot of boiler installs on you tube that don’t have flue snugs to comply with Part L building regs. What are the rules regarding flue snugs, do they have to be fitted on all new boiler installs. I prefer to use sand/cement...
Replies
5
Views
228
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock