Search the forum,

Discuss New poweflusher Leaks! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Smeagal

Hi


Just got my shiny new fernox mark 2 flushimg pump,not very pleased tried it on my own sealed system first and good job i did.

Top of flusher leaks through handle .Brackets holding flow and return valves leak through the bracket fixings, as well as male snaplocks.Hose clips were lose on one fitting ,not very chuffed any one else had leaks on these units through the top ,good job it was stood in a bund tray.I would really like to know other peoples experiences of bad workmanship on these units thanks!!
 
sounds like you had the water level to high, keep it within min and max marks.
 
cost a few bob so whip out your reciept and back it .:)regards turnpin
 
Mine leaks like sieve if you let it overflow. Just dont let it overflow.
 
Hi Everyone

Nope I had it between the max and min marks but it still leaked but only when set to circulate!!
 
Status
Not open for further replies.

Reply to New poweflusher Leaks! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock