Search the forum,

Discuss Mira Atom shower mixer will it work.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
6
Hi all,

Mira Atom shower mixer will it work with gravity hot (0.1 bar) and mains cold dynamic (0.7 bar)??

Cheers in advance.
 
They don't state pressure differential that shower will operate at, just min and max for either gravity or mains.

Just thinking someone on here might know pressure differential valve can operate at?

Reckon I'll have to pipe cold feed from CWSC.
 
Either way will require equal pressures so need to get a tank cold feed to the shower also I don't think the pressures will be good enough might have to go down the pump road
 
Thanks Shaun,

I've fitted tank cold feed in 22mm and will pipe both hot and cold in 22mm to within 1m of valve. Only got 1m head which spec says is min gravity pressure - if customer is not happy with flow rate will have to negotiate on supply and fit pump.
 

Reply to Mira Atom shower mixer will it work.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I done a straight change from a thermostatic shower to a new mira atom shower,when I run the shower in an upstairs ensuite it runs hot for a few seconds then goes back luke warm,I have a combi boiler,any advice please??.
Replies
11
Views
440
M
Hi, I'm hoping you can tell me the main differences between: Mira Digital Activate Shower & Mira Digital Platinum Shower and also the main differences between: Mira Opero Mixer Shower & Mira Evoco Mixer Shower I've scoured the internet but a lot of it is just marketing waffle and can't seem...
Replies
2
Views
364
hello all, happy new year! i hope i have posted this in the right section i have a shower bar mixer. the shower runs luke warm. a quick google search showed some ideas on how to adjust it. i tried adjusting it and it didn't change the temp. when i adjusted it the other way to test the cold...
Replies
40
Views
1K
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air gap as I was having dripping from the pressure relief valve. Since then I've lost a lot of pressure from the hot water feed to my shower. The rest of...
Replies
8
Views
263
Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated house (4 bathrooms is tragic). Current set up is: A hot/cold mixer in the main ensuite which is ok as long as you don't run anything else. One electric...
Replies
3
Views
365
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock