Search the forum,

Discuss Loud banging from Worcester Bosch Greenstar 24i Junior in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Can I measure the flow rate easily without one of those special cup meters?
 
Sorry I was wrong you can fill a bucket and time it never done it myself
 
Run the tap until it gets hot, then fill a bucket from your hot tap for 60 seconds, then decant the bucket into a measuring jug eg 1 litre at a time and this will provide your flow rate.
 
Someone checked the flow rate of the hot water for me today - it was around 5 litres/minute. As cdodds2004 mentioned in the previous post, it should be 9.8 litres/minute.

It was suggested that a clogged diverter valve could be the cause - is this likely?
 
Edit: Do you mean the small filter inside the turbine?
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Loud banging from Worcester Bosch Greenstar 24i Junior in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock