Search the forum,

Discuss Looking to go self employed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Starky

Gas Engineer
Messages
28
Hi All,

I need some advice please. I’ve been working in the social housing sector for 10 years now and would really like to start my own business as self employed plumber/engineer. This has been on my mind for a while now.

I’ve been doing a fair bit of private work, In the hope of building up a client base. I plan on joing check a trade, handing out leaflets approaching estate agents etc.

I know a lot of you guys are established and would appreciate any advice on all matters of being self employed.

My most amediate dilemma is whether to buy my van or go down the hire purchase route and which would have the best tax breaks.

Any help greatly appreciated.
 
Wouldn`t bother with the likes of check a trade and estate agents is a road to frustration imho. Start with a van you can afford outright to keep overheads to a minimum.
 
Hi rpm,

What route would say is best to generate work?
I’ve heard good things about check a trade from friends, have you had bad experiences with sites like that?

My thoughts on a van is to possibly hire purchase, to keep as much money in the bank as possible, I’ve budgeted about 10k to get the business of the floor but this would include a van.
 
Use check a trade to see how many plumbers in your area & the system can be managed to show high scores.
Local church mags and age aid can help but can be frustrating.
Hire purchase means a regular outgoing committment. You sure about that?
Use the little search box in top right corner, it's all been covered before.
 
I've known a few guys who are excellent experienced tradesmen who've not done well after going self employed. My advice would be to go on a business course because making money with a small business has very little to do with how competent you are at your trade.
 
Status
Not open for further replies.

Reply to Looking to go self employed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
465
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
212
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
217
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock