Search the forum,

Discuss Looking for EWI aware plumbers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

ecoelva

Hi, I am looking for plumbers that are familiar with EWI, to extend flues out 110mm we currently have houses in the Birmingham and Leicester area
 
Any gas safe registered engineer can sort that.

A wet plumber cant
 
Nope cant help you, im not aware of EWI. Not a clue.
 
It can basically be an old concrete walled house with modern outer skin added.
No drama.
Just get a GSR to fit a longer flue
 
usually longer flue/ condense if external and prv did a few for a local bloke who got a contract he dosnt use me now as i Id d a couple of boilers and capped them
 
Thank you for posting this opportunity for our members.

If this interests you, please pm the op direct.
 
Status
Not open for further replies.

Reply to Looking for EWI aware plumbers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
227
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
278
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
214
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
123
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
211
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock