Search the forum,

Discuss Looking for a Heating engineer specialising in UFH Specifically Wirsbo (East Herts) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
8
I am looking for a heating engineer who specialises in underfloor heating and has experience with Wirsbo 20mm pePex (now Uponor) based UFH systems with older 1 1/4" brass manifolds.

My self installed UFH badly needs servicing. The the springs in the actuators have broken/weakened so the water wont circulate around some loops and the whole system needs flushing and balancing. After extensive enquiries I have managed to obtain sufficient replacement actuators from across the UK to replace all 12 loops (8 + 4 on two separate manifolds). The mixing valves may also require replacing.
I also need to discuss/consider an external thermostat and possibly upgrading wireless room stats and replacing the old gate valves with lever ball valves.

Uponor recommended installers charge £45 per hour travelling time which will cost me £120 before he starts work!!
Fozzie
 
Status
Not open for further replies.

Reply to Looking for a Heating engineer specialising in UFH Specifically Wirsbo (East Herts) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock