Search the forum,

Lockshield - no stem

Discuss Lockshield - no stem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tonga1978

I am obviously missing something, this one radiator in our house has a lockshield with what appears to be no valve stem. Looks like a hexnut female. But I'm not sure. Can anyone tell me what I'm missing, this has to be standard, and I must need a key or something. Any advice appreciated. Pics attached. Cheers tonga1978
 

Attachments

  • IMG_8181.jpg
    IMG_8181.jpg
    85.3 KB · Views: 25
  • IMG_8182.jpg
    IMG_8182.jpg
    80.5 KB · Views: 25
  • IMG_8183.jpg
    IMG_8183.jpg
    86.5 KB · Views: 22
Just turn it using the correct sized Allen key
 
allen key mate
 
Yup 8mm.

That did the trick. Warm as toast now.

Cheers Chaps

Tonga
 
Yup 8mm.

That did the trick. Warm as toast now.

Cheers Chaps

Tonga
 
Status
Not open for further replies.

Reply to Lockshield - no stem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
exedon2
exedon2
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
SimonG
SimonG
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
308
Timmy D
T
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
127
Stigster
Stigster
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock