Search the forum,

Discuss Interesting response from bidding control in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Robert Tyrrell

Gas Engineer
Messages
701
I aksked a question about notifying them regarding a replacement UVDHWC and this was the response I received today.
I explained that I have the qualification but that I'm only registered with GS for gas etc, and not the G3. [They] appear to be of the opinion that I don't have to register with GS for this, just be registered with them ( Doesn't appear to matter for what) and as long as I have a G3 qualification, which I do have, I'm ok.

Hello Robert .


If you are Gas safe registered and hold the qualification for unvented installations you do not have to register with Building control as Gas safe will under the competent persons scheme when you have completed the installation.

Regards
 
All unvented cylinders need to be notified to the local Building Control and this can be done in a number of ways,
Directly to the local building control (after payment of a huge fee)
Through a competent person scheme as run by Gas Safe, IPHE or APHE. All these organisations will need to see your G3 qualifications before they will allow you to notify. When you notify them, within thirty days, of an installation they will in turn inform the local council and issue a certificate to the customer

I notify through Gas Safe (about £2.50) as I have my G3 qualifications registered with them

At least that's the situation as I understand it!!
 
All unvented cylinders need to be notified to the local Building Control and this can be done in a number of ways,
Directly to the local building control (after payment of a huge fee)
Through a competent person scheme as run by Gas Safe, IPHE or APHE. All these organisations will need to see your G3 qualifications before they will allow you to notify. When you notify them, within thirty days, of an installation they will in turn inform the local council and issue a certificate to the customer

I notify through Gas Safe (about £2.50) as I have my G3 qualifications registered with them

At least that's the situation as I understand it!!

Yep, that's what I thought as well, its just that the local BC don't appear to think that you need to register your qualification with GS, as long as you have it :)
Do GS charge for registering the extra qualification with them?
 
Yep, that's what I thought as well, its just that the local BC don't appear to think that you need to register your qualification with GS, as long as you have it :)
Do GS charge for registering the extra qualification with them?

Not a bean.
 
Status
Not open for further replies.

Reply to Interesting response from bidding control in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
384
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
232
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
213
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock