Search the forum,

IMI range tribune dn22 temp and pressure reliefvalve

Discuss IMI range tribune dn22 temp and pressure reliefvalve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Gary80gas

Gas Engineer
Messages
164
Just looked at an old unvented cylinder with an IMI range dn22 temp and pressure relief valve. The valve has a side tapping about 1/4'' in size. Its plugged with a short brass fitting with a spade shaped rectangle end. Its leaking through the center which means it has another thread inside. Can someone tell me what its for? Many thanks in advance. Cheers
 
Status
Not open for further replies.

Reply to IMI range tribune dn22 temp and pressure reliefvalve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
204
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock