Search the forum,

Discuss I want to be a tiler ! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

Ermintrude

Any of you chaps or no tails managed to get RHI training grant?

Which is best
 
I done a tiling course was ok, to be fair it's not rocket science, I get a fair bit of tiling just work from a level, keep it level, use a level, think about the set out and take ya time and rtfi
 
I done a tiling course was ok, to be fair it's not rocket science, I get a fair bit of tiling just work from a level, keep it level, use a level, think about the set out and take ya time and rtfi

You actually fell for his OP????
The blokes hates tiling with a passion. He even pays someone else to do the splash back at his home even though he was off work at the time. He will never make a tiler, so give him no advice.
 
Status
Not open for further replies.

Reply to I want to be a tiler ! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
203
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
61
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
198
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock