Search the forum,

Discuss How do I connect these items? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
I have an 11kg Alugas refillable gas bottle that I want to connect to a HeatSource propane heater and a Primus Tupike camping stove. I have never used any type of gas bottle before so have no idea what conncetors/valves/pipes/regulators to use. All these items will be fitted in a camper van. Ive attached several pics of the connections. Any help greatly appreciated.
Alugas.JPG HeatSource.JPG Primus_01.JPG Primus _02.jpg
 
I would say get a lpg gas safe engy to do the connecting up for you
 
As above.

LPG and camper vans are a recipe for disaster if not done correctly.
Very strict regulation on ventilation also.

LPG heavier than air so low level ventilation required.
CO poisoning also a concern in a small environment.

As stated recipe for disaster if not done to regs.

I would - for peace of mind - get a professional in to do the works.
 
Status
Not open for further replies.

Reply to How do I connect these items? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
245
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
338
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
214
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
195
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
218
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock