Search the forum,

Discuss Honeywell Evohome in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Sid Viscous

Plumbers Arms member
Plumber
Gas Engineer
Subscribed
Messages
261
Would love to hear anyone's experiences of Honeywell's Evohome system. I'm currently speccing a job & think this may be a contender.
 
Very good but of kit, bear in mind there is a limit to the number of trvs u can use per display but it's pretty generous for the average home.
 
It has alot of capability but usually most customers never end up using even half the features..
 
Status
Not open for further replies.

Reply to Honeywell Evohome in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
198
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
192
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
59
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock