Search the forum,

Discuss Hi All, my name is Steve and I am new here. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Steven Jones

Good Evening All,


My name is Steve and I am new here in the forums and to the world of plumbing.


I am in the process of leaving the Navy (leave in July after 13 years) and have decided to move away from my I.T based job and try something new (Plumbing and Gas in case you weren't sure). I am currently on a fast track plumbing course (don't hate me for it all you real plumbers, we all have to start somewhere) with Access Training in Cardiff and will also be doing 4 weeks of gas afterwards.


I am really enjoying the course and am looking forward to passing (confident, I have hot water systems (vented) tomorrow morning) the exams and gaining the basics of plumbing. I have read a number of posts of people getting confused about the qualifications available on the fast track courses so wanted to post something to help them and any others seeking answers. Unfortunately as I am new I can't post in the training area yet. I wish someone had explained it to me properly before, as I believed it was a full NVQ course. However now I understand I am more than happy.


Fast track does not get you an NVQ Level 2 or any other level at that. You can only gain that on job, what you do get from fast track is a Level 2 diploma (which I believe is just like the old technical certificate, 6189 I think it was but may be wrong there), which from there you can complete your portfolio by placement or work, thus gaining the NVQ level 2. You will sit several exams (about 12 I think) which are mostly online (GOLA) covering all aspects of plumbing and complete a diploma portfolio of tasks such as installation of bathrooms, cloakrooms, hot and cold water systems etc.


I don't expect that I will be able to start my own business after the course but I am hoping to have a pretty good grounding to start from and maybe one day, after enough time and lots of experience, to do just that. I also expect with the economy being the state it is that a job will be harder to find but the balance of my life has shifted and leaving the Navy was worth the risk.


I do have a couple of questions that maybe someone could help me with.


1. Does anyone know of any ACS Placement/Exam centres in Hampshire (the nearer to Portsmouth the better)?
2. Does anyone know of anywhere to get past papers/revision papers for C&G NVQ Level 2 exams (I have scoured the net and not having much luck)?


And finally, please accept my apologies if I am posting in the wrong place, I am new not just to this forum but forums in general.


I look forward to chatting and using the forums.


Steve :)
 
Hello Steve and welcome I'm sure someone here will have what you need ...regards turnpin:smile:
 
:welcome: to the forum Steve :) ... Good luck on your return to Civy street :)
 
hello my names croppie and i am a alcho...... oops wrong forum
welcome along steve
 
Hello my name's Croppie and I am an alco................. Oh wow! Veja Du!

Welcome to the madhouse Steve. You'll find a few other matelots on here
 
Hi Steve and welcome to the forum.

Slight commercial conflict of interest here, as a forum sponsor, and part owner of Certifi Training Ltd (see sponsor banner on the right).

Certifi Training runs a centre in Portsmouth that does ACS, but it does not do fast track. Our partner in running it also runs a GSR business, and occasionally takes on placement students as part of that business, but only if he has enough work for (don't take this the wrong way) relatively unskilled labour.

If you click on the Certifi link, get the number off the contact us page, and ring in the morning - ask for Sean - you might get lucky, but no promises.
 
Hello my name's Croppie and I am an alco................. Oh wow! Veja Du!

Welcome to the madhouse Steve. You'll find a few other matelots on here
have i played that one on you before?
 
welcome, staying in the Navy would have been the sensible option, speaking as someone whos sat on both sides of the fence
 
Status
Not open for further replies.

Reply to Hi All, my name is Steve and I am new here. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
135
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
87
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
264
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock