Search the forum,

Help identifying a Bristan Shower

Post new thread

Discuss Help identifying a Bristan Shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

S

smallieboy

Messages
2
Hi All

As you can see from the attached pix, the flow control knob on my Bristan shower has broken. It was installed before I bought the house (possibly between 2015 and 2017) but I've no idea what model it is. Firstly, can anyone help me to identify it to see if I can get a replacement knob.

Secondly, I can refit the knob but as soon as I try to turn the shower on, it immediately loosens again. The screw goes into the thread of the 'tap' but it seems as if it is immediately being undone by the action of turning the shower on; might this simply a problem with lock washer not gripping?

Thanks in advance
 

Attachments

  • shower0.jpg
    shower0.jpg
    847 KB · Views: 15
  • shower1.jpg
    shower1.jpg
    815.3 KB · Views: 13
  • shower2.jpg
    shower2.jpg
    252.9 KB · Views: 11
  • shower3.jpg
    shower3.jpg
    262.8 KB · Views: 12
Not worth finding parts

Bristan zing cheap enough
 

Reply to Help identifying a Bristan Shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
200
SimonG
SimonG
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
129
Lou
Lou
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Lou
Lou
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
186
Timmy D
T
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbers' Talk
Tiling Forums UK
Tiling Forum UK
DIY Talk
Tiling Tools for Beginners
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock