Search the forum,

Discuss Hello all! another newb in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
120
Hi All,
Been browsing this forum for a while and picked up some good info already.

I’m a diy’er and do a fair bit of my own work where I think it’s possible.

Just joined up as im hoping to be able to pick up some more advice and guidance from the pros on specific projects that I have a go at.

Cheers
:)
 
Hi Serval,

Welcome to the forum.
I am pretty sure you can pick up some good tips of the other engineers.
 
Good morning Serval, welcome to the forum, Lots of good advice and tips on the forum. Any questions, Advice or queries will gladly be received and no doubt answered for you. Please do not however ask how to repair any gas related problems as this is against the forum rules and we will not answer any DIY gas related problems. Enjoy browsing and good luck mate.
 
hello and welcome
 
Welcome, always a pleasure to see another new face here
 
Status
Not open for further replies.

Reply to Hello all! another newb in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
216
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
218
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
215
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
228
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
310
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock