Search the forum,

Heating engineers looking for a change?

Discuss Heating engineers looking for a change? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jdunc2301

Hi, Are there any heating guys out there looking for a change? The company I work for are a manufacturer of ground and air source heat pumps, they are looking to hire a new service engineer in the south. Got me sweating a bit! Hoping they bring on someone decent....anybody on here fancy it?
 
If they are willing to contract it rather then direct labour then sign me up I'm looking at moving into the renewable markets to get a good grounding and knowledge before they become the norm. I'm based in kent so south east
 
jdunc2301 said:
Hi, Are there any heating guys out there looking for a change? The company I work for are a manufacturer of ground and air source heat pumps, they are looking to hire a new service engineer in the south. Got me sweating a bit! Hoping they bring on someone decent....anybody on here fancy it?
Click to expand...

Is your company still looking for a heat pump engineer?
 
Status
Not open for further replies.

Reply to Heating engineers looking for a change? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
148
johndave
johndave
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
199
Dave Moore
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Stigster
Stigster
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
59
Dan
Dan
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock