Search the forum,

hand drilling and tapping set for 1/8th and 3/8th

Discuss hand drilling and tapping set for 1/8th and 3/8th in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Gasmk1

Gasmk1

Esteemed
Gas Engineer
Messages
2,139
open to offers for this Abbirko drilling and tapping set for inserting test nipples into steel pipe. open to offers will suit commercial gas engineers. i am manchester/warrington based

item no longer needed
 
Status
Not open for further replies.

Reply to hand drilling and tapping set for 1/8th and 3/8th in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

G
New UPS3 pump too powerful ?
Hi, I have just had my central heating system "upgraded" for a four bed-roomed detached house. The heating company recommended going from the open vented system to sealed / pressurized system, new pump ( UPS3 Grundfos ) all new plastic pipework ( extending ) the 22mm feed and return pipes so no...
Replies
9
Views
998
Zippymark
Z
B
Is this correct plumbing set up
Hi everyone, Is this set up correct: Attic stop valve turns off the cold water to my bathroom (I think it is the rising main in the attic which I and other residents in the building share as we have shared supply to bathrooms and kitchens) Under kitchen sink stop valve turns off cold water in...
Replies
0
Views
487
BobbyJoe
B
Z
Low gas pressure during boiler full load test
Hi, I am a homeowner but caught between a rock & a hard place. I am trying to get a Vaillant ecoTEC 630 plus serviced but the gas safe engineer & Vaillant engineer say one thing, whilst the SGN engineer says another. I do not know how to proceed and would value some informed advice. The rock...
Replies
8
Views
1K
gmartine
gmartine
R
Challenging installation 1300 FT / 600 FT of head / 40° hill
Greetings, esteemed community members, I find myself in possession of a remote and highly inaccessible plot of land, devoid of any utilities. On this land, there exists a well housing a 10-year-old pump that has never been utilized. I intend to conduct a thorough test using a portable...
Replies
4
Views
602
John.g
J
J
Very weird set up - is it a primatic cylinder?
I can't get a consensus on this from four plumbers that have visited. We've been using the system with no prpblems for 7 years - but the cylinder leaks and needs replacing. It's an old and peculiar set up I have onherited after buting my two storey house. I would greatly appreciate any...
Replies
3
Views
864
Last Plumber
Last Plumber
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock