Search the forum,

Discuss Good old Aldi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jonny5isalive

Plumbers Arms member
Plumber
Gas Engineer
Messages
320
e65fb65dd51dd4acd642a0af82a9a043.jpg
 
Seem very reasonable! I noticed today that Lidl were doing a 5 piece diamond core drill bit set plus it's suction cup guide with water cooling connection for Ā£5.99. It is for ceramic tiles, marble, etc.
Bits are 4, 6, 8, 10, 12mm.
They might not last long, but worth a try, so I got one.
 
Last edited:
I see Lidl next Thursday 20th Aug are doing a 6 piece ratchet ring spanner set, but it is for Ā£11.99
 
I have a wall chaser, basically a twin bladed angle grinder, bought from aldi about 8 years ago. Its had some hammer but it owes me nothing.
 
Seem very reasonable! I noticed today that Lidl were doing a 5 piece diamond core drill bit set plus it's suction cup guide with water cooling connection for Ā£5.99. It is for ceramic tiles, marble, etc.
Bits are 4, 6, 8, 10, 12mm.
They might not last long, but worth a try, so I got one.

Theyre always worth a try. Especially at the price

My vde screwdrivers have well outlasted their ck counterparts and the little pick set i bought years ago on the offchance it would be useful has been great
 
I see Lidl next Thursday 20th Aug are doing a 6 piece ratchet ring spanner set, but it is for Ā£11.99

These are hinged. 8 10 13 14 17 . Compared to other versions of the same theyre pretty cheap.. Not quite jokers tho
 
best take someone along with you to reach up for them...............





it's Friday, what do you expect after your recent abuse :)


Preferably not jonny5isalive or you'll come back hammered by the sounds of it haha. For cheap stuff, Lidl's really not bad.
 
Found a nice small ratchet set with tool bits & sockets in Maplin, used it a few times now and no complaints if anyone is looking.
 
Found a nice small ratchet set with tool bits & sockets in Maplin, used it a few times now and no complaints if anyone is looking.
Any pic's...and price would be handy......regards Turnpin:8:
 
Status
Not open for further replies.

Reply to Good old Aldi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
0
Views
71
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
178
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
245
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
153
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
285
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock