Search the forum,
  • Thread starter Ch4 plumbing
  • Start date
  • Replies 6
  • Views 45

Discuss Forum Sponsors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Ch4 plumbing

Not sure if its possible but I know Dan was asking for help with the above with regard to new sponsor's, Has anyone tried shower doctor? I know we as a forum are forever pushing people towards there website for help and maybe there might be a chance for some money in return?

I know its easier said then done but just a thought.
 
Okay mate it dawned on me when I was looking back through some old posts.
 
Doesn't mean we can't try again though. I may have a chat with espares Ltd, they do a lot of small appliance bits and bobs.
 
Anyone tried plumbcentre? I hear they dish out free pens like nobody's business!
 
Anyone tried plumbcentre? I hear they dish out free pens like nobody's business!

I got given a free Milwaukee marker a couple of mths ago from Plumbs (well they threw it at me after my constant requests for freebies and moaning that the coffee wasn't free anymore)
The Grahams I use are the boys for pens and all the other free stuff that manus give out
And I know which draw they're all kept in :devil:
 
Remember when ray gave out freebies? He drew us in like a crack dealer with promises of sweets and biscuits and pens. Those were the days my friend we thought they'd never end!
 
Status
Not open for further replies.

Reply to Forum Sponsors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
123
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
209
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock