- Messages
- 1,826
Don't do it in Indonesia
https://www.liveleak.com/view?i=7b2_1487697404
https://www.liveleak.com/view?i=7b2_1487697404
- Thread starter jonnyswamp
- Start date
- Replies 2
- Views 1K
- being plumber thinking those
Discuss For those thinking of being a plumber in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
N
newcastle phill
Haha.
They have probably paid a youngun off the street to save them getting dirty
They have probably paid a youngun off the street to save them getting dirty
- Messages
- 871
You got it wrong mate, this is the Malay mud bath. Notice how the therapists are wearing traditional orange overalls and at 0:48 you can see client's parked car, his missus eagerly waiting for her turn.
- Status
Reply to For those thinking of being a plumber in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-