Search the forum,

Discuss Flavor raglan balanced flue fire. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

buckley plumb

Went to this fire today customer asked me to check as builder prised fire forward to fit new marble panel. The flue is cemented outside so no movement yet I could prise fire forward upto 1" . I used analyser to test around fire case and got 10ppm but air was 20.9 and co2 0. This has puzzled me a bit my analyser is s tpi 709. Anyone got any ideas.should say flavel damn auto spell
 
Last edited by a moderator:
I assume you zeroed in fresh air. No one been smoking in room recently?
Could be the flue connection at rear needing checked.
 
yes mate zeroed in air only getting ppm by fire elsewhere in room zero , going back to take out fire I think they have pulled the seal apart slightly

I assume you zeroed in fresh air. No one been smoking in room recently?
Could be the flue connection at rear needing checked.
 
Status
Not open for further replies.

Reply to Flavor raglan balanced flue fire. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock