Discuss Flaring Tool in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Flaring Tool in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Plumbing tools are essential for anyone doing their plumbing job. We also have tool talk on the Tilers Forum here and we have Electricians tool chat here!
Hi All
Looking to purchase a press fit tool and considering many brands. I don’t do a lot of pipe work, so don’t need a heavy duty one. Hot works are becoming a thing of the past.
Any recommendations?
Hey all,
First post here, am an avid DIY'er and I'm putting in my mother-in-law's bathroom this weekend, this will be the 3rd bathroom that I've put in, however, I always get by with the poor tools that I have.
In your experience what would you say are essential tools?
I'm also looking to buy...
Hi there, I'm building a propane system inside a van and I used flared connections. I'm getting 2 leaks from the side of the nut where the copper tube comes out (not the threaded/flared side). What could be a reason for this? I assume I need to redo the flare... or is there something else I...
Hi I am trying to replace my bathroom tap with a new one, I am trying to remove the existing rusty flexible tap connectors from this bit of 22mm copper pipe.
But this thing is not budging at all its like its welded or super glued on, I am using some water pliers on both points here but its not...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 0
-
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 1
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-