Search the forum,

Discuss Ferroli HE31 C - intermittent hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
Please can anyone advise why I am getting intermittent hot water from my Ferroli HE31C combination boiler.
I have noticed when calling for hot water, sometimes the boiler will fire up straight away, start to give hot water then show a D1 code indicating it has reached temperature. Sometimes if the water is still running, the boiler will fire up again until temperature is reached. This cycle continues until the amount of hot water required for showering or other uses is reached.
The diverter valve appears to be ok.
Any ideas would be greatly appreciated.
 
You need a gas Safe engineer we will not provide diy gas info.
 
Status
Not open for further replies.

Reply to Ferroli HE31 C - intermittent hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock