Search the forum,

Discuss electric shower problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Wheres you plumbing career ---------------------its behind you
Oh no it's not, oh yes it is, oh no it is, oh yes it isn't....



It's Friday, it's five to five and it's Crackerjack.
 
And all the poor saps will come on tomorrow to see why this thread was so interesting, and after a 1/2 hr read they be saying OH NO IT ISNT:smilielol5:
 
By the way, the best way to get rid of your old boiler is.....

.....send her back to her mothers.
 
Have we answered "electric shower problem yet?"
 
Last edited by a moderator:
Right I'm going to waste our fun up here and close this, but lets continue downstairs in the general discussion forum, for sanitys sake and because I've got to get a refill from the fridge.

Someone start up a thread downstairs and we'll all see you in 5 :D
 
Don't mind me while I reply to a few of the threads. We need the new thread pages to be picked up correctly. If this thread isn't current, just visit the plumbing forum and post your own new thread or checkout the other existing threads.
 
Status
Not open for further replies.

Reply to electric shower problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
101
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
82
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
225
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
277
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
182
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock