Search the forum,

Discuss Casva valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Dave Walker

Doing a install at the moment and we have a casva valve that has been supplied with the kit. There are 3 of us on the job totalling over 50 years experience and we don't have a clue what it is for or were to fitt it in the system. We have 2 risers 1st is mains feeding 6 flats and the second is boated feeding the other 12. So I thought it would be a good idea to ask the knowledge base that is pluming forum.
 
Thanks Tom So does it just connect it to the top of riser and that's it or does it need to go to atmospher as there is a thread on both sides of valve?
 
have you got a pic as well never seen one as well
 
8481d5d438d9a67c7394c02c20249904.jpg

Not the best picture but this is it
 
The outlet should be piped to outside in case it passes an amount of water during venting, or if it fails.
 
Status
Not open for further replies.

Reply to Casva valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock