Search the forum,

Discuss BTSC - part course completed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

rocketmanbkk

Plumbers Arms member
Plumber
Messages
4,113
Hi Friends

My mate did a course with BTSC. I saw him over the weekend and he never completed it and I think, from reading bits on here they went bust?

Anyway, he asked me whether he can take his folder to another provider to complete the unfinished units. I have no idea so open it up to everyone.

He did 4 weeks, bending & joining, cold water, hot water and then a week of lead all signed off.

Looking at his folder, he had to complete low carbon steel and bathroom fitting.

Any thoughts? As I say I have no idea so cant advise him.

He also did some test! But have no idea which ones!

Cheers all.

Rocket
 
Status
Not open for further replies.

Reply to BTSC - part course completed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Some advice needed please re a 3 year old combi gas boiler. The hot water works but no heating. A gas engineer was already booked to do the annual safety check before the fault developed. He said the boiler is ok with no fault. He said there must be a leak under the floor boards causing hot...
Replies
3
Views
398
Had conventional boiler and tanks removed last year and new combi fitted and just recently had it serviced but the guy who did it has given me a gas warning notice for at risk as the outside wall meter box has been drilled through for the gas pipe to go horizontal straight to the boiler. The...
Replies
9
Views
696
Hi everyone, I’m new to the forum and joined specifically to try to get an answer to my question. I have an 88yo mother-in-law who is recently widowed and her 90yo husband who has since passed insisted on doing everything for himself. Nothing wrong with that but now that he has gone my wife...
Replies
4
Views
284
Not sure what my options are here. Basically a friend of mine recommended his father in law to do our plumbing/gas work for our renovation. First job was to install a new boiler, and later install radiators, bathroom, kitchen, etc. The boiler was installed last September but not switched on as...
Replies
18
Views
2K
My plumber fitted a shower, 2 of the walls are glass panels and one is a tile board (wedi board). He joint the wedi board pieces (3 pieces) close to each other but didn't use any joint sealant. When I asked him whether this will be an issue for future leaks he dismissed it. How worried should I...
Replies
1
Views
459
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock