Search the forum,

Discuss Best combi for 2 bathrooms in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Gary80gas

Gas Engineer
Messages
164
I need to fit a wall hung combi boiler to service 2 bathrooms. Im about to go for a Worcester 38cdi combi, its 16.4 litres min. The 42cdi only gives 17.1 litres for an extra 300 quid, hardly seems worth it. Whats your boiler choice for 2 bathroom installation?
 
Viessmann 111 if you really want a combi
 
I need to fit a wall hung combi boiler to service 2 bathrooms. Im about to go for a Worcester 38cdi combi, its 16.4 litres min. The 42cdi only gives 17.1 litres for an extra 300 quid, hardly seems worth it. Whats your boiler choice for 2 bathroom installation?
A Vaillant system boiler with an unvented cylinder. I wouldnā€™t put a combi into a 2 bathroom house. Doubt that you will be happy with the outcome.
 
agree with Shaun V 111

A Vaillant system boiler with an unvented cylinder. I wouldnā€™t put a combi into a 2 bathroom house. Doubt that you will be happy with the outcome.

All down to if theres room for it all
 
This viessman 111 how consistant is the hot water flow. If its making 18 litres using a hot store, the hot store will soon be depleted and then its down to standard combi flow rates. So the water will run hot and then the temp starts dropping down after a few minutes. Is this right?
 
Status
Not open for further replies.

Reply to Best combi for 2 bathrooms in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. Itā€™s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
276
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
4
Views
174
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
39
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
329
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
244
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock