Search the forum,

Discuss bath shower mixer taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
just fitted a new bathroom with bath shower mixer taps when turning on both hot and cold taps very limited water supply yet when shower mixer is engaged pressure is fine gravity fed cold water hot water fed via a cylinder pressure is equal else where in bathroom any ideas what is causing the lack of water from hot and cold taps
 
Maybe stating the obvious, - but does it have an airator or even a basic plastic nozzle on end of spout? It could well be blocked with fine debris, flux, solder, scale, etc, that comes when water was turned back on. Sounds very like that because you say cold and hot flow poor and won't alter if both on
 
Status
Not open for further replies.

Reply to bath shower mixer taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock