Search the forum,

Anyone recognise this tap?

Discuss Anyone recognise this tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

WaterTight

Esteemed
Plumber
Subscribed
Messages
5,439
6xzs0o.jpg
 
I don't recognise the make unfortunately. The other "unfortunately" is that you shouldn't really be replacing that tap with another pull out spout type because it's near impossible to make it comply with water regs due to being a high backflow risk situation (basically needs to be treated the same way as a bidet with its own break tank which nobody will ever do). I would replace it with a non-pull out spout design of your choice.
 
Status
Not open for further replies.

Reply to Anyone recognise this tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
  • Question
Does anyone recognise this boiler?
Anyone recognise this boiler How old could it be? Is it condensing? Ta muchpppl
Replies
2
Views
533
Basher
B
E
Anyone know how to get into this tap?
Hi. Can anyone help me get into this tap? I have them on the bathroom sink and bath and 2 out of 4 are dripping. I've have had two plumbers in to replace the washers and neither could get them open. The gold coloured ring under the top unscrews on two of them but won't budge on the ones that...
Replies
1
Views
160
ShaunCorbs
ShaunCorbs
A
Does anyone recognise this bath filler?
This bath filler/overflow is supposed to turn to divert water flow to a shower above. It’s not clicking across anymore. Does anyone recognise it? Fitted in 2014. It was installed together with this Bristan inbuilt thermostatic controller.
Replies
1
Views
591
Deleted member 120897
D
M
Tap identification needed...
Morning. Have some bath taps which I am struggling to get cartridges for. Anyone recognise them? The cartridges are about 28mm wide? Cheers
Replies
8
Views
843
Deleted member 120897
D
T
Can anyone identify this tap please?
Hello everyone, One of the hexagonal pieces on the head of one of these bathroom basin mixer taps (Heritage Watersmith) has been lost and I am looking for a spare. Does anyone recognise the model? Many thanks!
Replies
4
Views
879
taphunter
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock