Search the forum,

Aluminium foil insulation

Discuss Aluminium foil insulation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bonkersboiler

Having had the insulation destroyed on my Worcester Danesmoor to the point of nearly nothing left I need to re-lag it. I thought it would be straight forward to get the aluminum foil but cannot find it anywhere in the UK, only from the USA on ebay, the only stuff I can find here has polythene or similar in it which I don't think is suitable? does anybody know a source where I can buy it off the roll? Also is the inner insulation material everyday fibreglass rockwool?

Many thanks.
 
Just put Pipe Lagging into a well known search engine and pipelagging.com amongst others came up. UK company with UK telephone number!
 
We use pipelagging.com all the time, knowledgeable guys (actually Ryan Air Conditioning Spares) and have a phenominal range of materials always in stock, note that it is sometimes cheaper to by 1m lengths not 2m due to the shipping costs :)
 
Worcester said:
We use pipelagging.com all the time, knowledgeable guys (actually Ryan Air Conditioning Spares) and have a phenominal range of materials always in stock, note that it is sometimes cheaper to by 1m lengths not 2m due to the shipping costs :)
Click to expand...

Normally use beta insu very good I find
 
Status
Not open for further replies.

Reply to Aluminium foil insulation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
223
Firefox
F
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
exedon2
exedon2
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
221
cheddarman
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
217
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock